Accurate measuring is essential as it helps to ensure the products will fit your space and function properly.
If necessary, we will send an experienced, professional measurement service team to visit your home to assess the conditions and provide accurate measurements.
Additional fees will be charged accordingly.
Also, you can solve the installation problem by yourself. We provide professional MEASUREMENT GUIDANCE.
HOW TO MEASURE YOUR SPACE?
Accurate measurements as indicated in the measuring procedure are the key elements we will need to plan your new house. With this information, our specialists will be able to help design your dream new house!
Use room space for example to explain measure steps below:
A tape measure, pencil, and paper: preferably graph paper for ease of drawing.
STEP 1: Make the room plan drawing.
Draw a rough outline of your room, record the overall length of each wall, and label walls, pillars, windows, and doors. Remember to measure clockwise.
STEP 2: Mark the ceiling height
Measure the ceiling height and write it in the center of your drawing. Even in the same room, ceiling heights can vary by as much as several inches. It is better to measure different areas of the room. If it varies, write down both the low and high measurements.
STEP 3: Label and measure doors and windows
You can begin at the left corner of wall A to measure the first window, door, or wall. Continue clockwise around the room until each wall, window, and door has been counted.
STEP 4: Identify and measure unmovable obstructions
Draw in any obstructions, such as electric outlets, light switches, sink plumbing, gas meter, gas duct, etc., that you either cannot move or do not want to move. Remember, measure clockwise too. Measure the obstruction and record the width, height, depth, and distance to the wall or floor of the obstruction on your drawing.
TIPS: The label of doors, pillars, and windows are purple lines with a word; the label of unmovable obstructions is black dotted lines with a number which show in wall A/B/C/D below.
TIPS: No need to measure wall B because of no room for a cabinet.
a- Width and depth of pillar
b- Height and depth of the beam
c- Height from wall to the door side
d- Distance from door top to ceiling
e- Distance from wall to the window side
f- Height from the window sill to floor and window top to ceiling
① – Distance from wall to gas meter side
② – Height of gas meter
③ – Distance from wall to electric outlets
④ – Height of electric outlets
⑤ – Distance from wall to sink plumbing
⑥ – Height of sink plumbing
⑦ – Distance from wall to gas duct
⑧ – Height of gas duct